A wheel alignment report before and after adjustment
Enter measured angles by position, readings after the work and limits from the reference used. The PDF keeps the test conditions and operations performed.
Show what was measured and what changed, alongside the comparison reference.
Fictional data · demonstration example
OBDAuto · Complete example
Wheel alignment before and after
Hyundai Tucson · 2021 · EXAMPLE
See the exact document you can generate: vehicle details, findings and the sections specific to this report type.
- Specification source
- Example reference
- Vehicle setup and conditions
- Tyre pressures and steering position checked before measurement.
- Measurement document format (enter decimal degrees)
- Decimal degrees
- 2 pages · actual PDF format
- Photos, findings and recommendations
- The same content as in the app
DEMO · Fictional data and illustrative photos.
What it solves in the workshop
Before and after on the same row
Initial and final readings belong to the same angle and position.
Traceable specifications
Record the source and reference version, then the minimum and maximum limits used.
Written adjustment limitations
Record vehicle setup, preparation checks and work that could not be completed.
What the report includes
- Wheel or axle position and the angle measured.
- Before and after readings entered in decimal degrees.
- Recorded minimum and maximum limits with specification source and reference.
- Vehicle conditions, tyre-pressure checks and steering-wheel centring.
- Work performed and adjustment limitations.
Fictional data · demonstration example
Wheel alignment before and after
- Reference
- DEMO-1042
- Vehicle
- Hyundai Tucson · 2021
- Position / angle
- Front left · toe
- Before
- 0.18°
- After
- 0.08°
- Reference
- Demonstration example
Recorded finding
Fictional example: front left toe is recorded as 0.18° before and 0.08° after work; the reference is illustrative.
Recommended next step
Check the readings against the exact vehicle specification and record any adjustment limitations.
Example angles are not recommended settings for an actual vehicle.
How to complete the report
- Confirm vehicle setup, measurement conditions and the applicable specification.
- Enter before and after readings for each position and angle, with limits from the reference used.
- Review units, work and limitations, then generate the PDF.
Questions about this report
How do I enter degrees and minutes?
Numeric fields accept decimal degrees. The document display format is selected separately; check the conversion before entering readings.
Does the app automatically retrieve readings from the alignment machine?
This page presents documentation of entered values. Verify the readings and equipment reference when completing the sheet.
Does an angle within limits confirm fault-free suspension?
No. The comparison applies to the readings and limits recorded. It does not certify overall suspension or vehicle condition.
Can I add my workshop logo and colours to the report?
Yes, on paid reports: choose the style (modern, classic for print, your workshop colour, minimalist, premium or sport), the colour, header details, your own numbering, the technician signature and stamp, plus a message, terms and IBAN. Free reports use the standard OBDAuto design.
Open the form with this report type already selected
Sign in, fill in the vehicle details and generate the PDF with your workshop header. You can change the report type at any time in the form.
Generate your first report free